FIBARO FGWPG-121 Operating Manual Download

Page: 22 / 22

REGuLATIOnS

#12: Regulations

Legal Notices

All information, including, but not limited to, information regarding the

features, functionality, and/or other product specification are subject

to change without notice. Fibaro reserves all rights to revise or update

its products, software, or documentation without any obligation to no-

tify any individual or entity.
FIBARO and Fibar Group logo are trademarks of Fibar Group S.A.
All other brands and product names referred to herein are trademarks

of their respective holders.

Warning

This product is not a toy. Keep away from children and animals!

Declaration of conformity

hereby, Fibar Group S.A. declares that the device is in compli-

ance with Directives 2014/53/Eu and 2011/65/Eu, 2015/863.

The full text of the Eu declaration of conformity is available

at the following internet address: www.manuals.fibaro.com

WEEE Directive Compliance

Device labelled with this symbol should not be disposed with other

household wastes. It shall be handed over to the applicable

collection point for the recycling of waste electrical and elec-

tronic equipment.

Summary of Contents for FGWPG-121























Search results

Summary of Contents for FGWPG-121

Reviews:

Related manuals for FGWPG-121

Brands by name

Popular brands

FIBARO FGWPG-121, Operating Manual

Search results

Summary of Contents for FGWPG-121

Reviews:

Related manuals for FGWPG-121

Brands by name

Popular brands