12
HEAD CALIBRATION
Calibrating the device to your radiator valve is required for proper
controlling the temperature.
#10: Head calibration
Calibration is performed:
• Automatically, after 10 minutes from turning on if no operation on
the device has been made (only at
fi
rst installation),
• Automatically, after 10 minutes from last state change (only at
fi
rst installation),
• Manually, using the menu (see below),
• Manually, via application.
NOTE
Calibration
cannot
be performed while
the device is being
charged.
i
To perform calibration using the menu:
1. Use the included key to press and hold the button.
2. Release the button when you see
white
LED colour.
3. Click the button to con
fi
rm the selection.
