17
confIguratIon
9: Configuration
9.1:
Associations
Association (linking devices)
– direct control of other devices with-
in the Z-Wave system network.
Associations allow:
• reporting the device status to the Z-Wave controller (using Lifeline
group),
• creating simple automations by controlling other devices without
participation of the main controller (using groups assigned to ac-
tions on the device).
i
Commands send to 2nd–10th association groups re-
flect inputs operation according to device configura-
tion, e.g. turning the first channel on using input will send
frame responsible for the same action.
The device provides the association of 10 groups:
1st association group – “Lifeline”
reports the device status and al-
lows for assigning single device only (main controller by default).
2nd association group – “RGBW Sync”
allows to synchronize state
of other FIBARO RGBW Controller devices (FGRGBW-442 and FGRGB-
WM-441) - do not use with other devices.
3rd association group – “On/Off (IN1)”
is used to turn the associat-
ed devices on/off reflecting IN1 operation.
4th association group – “Dimmer (IN1)”
is used to change level of
associated devices reflecting IN1 operation.
5th association group – “On/Off (IN2)”
is used to turn the associat-
ed devices on/off reflecting IN2 operation.
6th association group – “Dimmer (IN2)”
is used to change level of
associated devices reflecting IN2 operation.
7th association group – “On/Off (IN3)”
is used to turn the associat-
ed devices on/off reflecting IN3 operation.
8th association group – “Dimmer (IN3)”
is used to change level of
associated devices reflecting IN3 operation.
9th association group – “On/Off (IN4)”
is used to turn the associat-
ed devices on/off reflecting IN4 operation.
10th association group – “Dimmer (IN4)”
is used to change level of
associated devices reflecting IN4 operation.