Fiat Uconnect 5.0 Page 80 Manual Download

Page: 80 / 142

3. Zoom bar

Zoom in and out by moving the slider.

Options

Press the “Options” button to set the information shown
on the map and show the following information:

•

Names

— Select this option to show street and city

names on the map.

•

Points of interest

— Select this option to show POIs on

the map. Press “Choose POIs” to choose which POI
categories are shown on the map.

•

Favorites

— Select this option to show your Favorites

on the map.

Sounds And Voices

About Sounds And Voices

Your TomTom navigation system uses sound for some or
all of the following:

•

Driving directions

•

Warnings that you set

There are two types of voice available when navigating:

Computer voices

— Computer voices are generated

by your navigation system. They read traffic and voice
command responses.

Human voices

— These are recorded by an actor and

only provide route instructions.

Changing The Volume Level

You can change the volume for your navigation system
on the main unit.

NAVIGATION — If Equipped

Summary of Contents for Uconnect 5.0















































































































































Search results

Summary of Contents for Uconnect 5.0

Reviews:

Related manuals for Uconnect 5.0

Brands by name

Popular brands

Fiat Uconnect 5.0, Manual

Search results

Summary of Contents for Uconnect 5.0

Reviews:

Related manuals for Uconnect 5.0

Brands by name

Popular brands