Fiat Uconnect 5.0, Manual

Page: 32 / 142

Gently insert the Auxiliary device cable into the AUX
Port. If you insert a Auxiliary device with the ignition
ON, the unit will switch to AUX mode and begin to play
when you insert the device cable.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g., selecting play-
lists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the VOLUME rotary knob, or with the volume of the
attached device.
NOTE:
The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.
Bluetooth® Mode
Bluetooth® Streaming Audio (BTSA) or Bluetooth®
Mode is entered by pairing a Bluetooth® compatible
device containing music, to the Uconnect® system.
Before proceeding, the Bluetooth® device needs to be
paired through Uconnect® Phone to communicate with
the Uconnect® System.
NOTE: See the pairing procedure in this manual for
further details.
Once the Bluetooth® device is paired to the Uconnect®
System, push the MEDIA button. Once in MEDIA mode,
press the “Source” button and select Bluetooth®.
32 MEDIA MODE