Fiat 500X2017, User Manual

Page: 136 / 228

Here’s How:
1 . Push the Uconnect Phone button and wait for the beep, then say “reply . ”
Uconnect will give the following prompt: “Please say the message you would like to
send
. ”
2 . Wait for the beep and say one of the pre-defined messages . (If you are not sure, you
can say “help”)
.
Uconnect will then read the pre-defined messages allowed
.
3
.
As soon as you hear the message you would like to send, you can interrupt the list of
prompts by pushing the Uconnect phone button and saying the phrase
. Uconnect will
confirm the message by reading it back to you .
4
.
Push the Phone button and say “Send
.
”
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes
.
Stuck in traffic
.
See you later
.
No
.
Start without me
.
I’ll be late
.
Okay . Where are you?
I will be <5, 10, 15, 20, 25,
30, 45, 60>* minutes late .
Call me . Are you there yet?
I’ll call you later . I need directions .
See you in <5, 10, 15, 20, 25,
30, 45, 60>* minutes
.
I’m on my way
.
Can’t talk right now .
I’m lost
.
Thanks
.
*Use only the numbers listed (in increments of five up to 60 minutes) or the system will
not transpose the message
.
Helpful Tips And Common Questions To Improve Bluetooth Performance
With Your Uconnect System
Mobile Phone won’t reconnect to system after pairing:
• Set mobile phone to auto-connect or trusted device in mobile phone Bluetooth set-
tings (Blackberry devices)
.
• Perform a factory reset on your mobile phone . Refer to your mobile phone manufac-
turer or cellular provider for instructions
.
• Many mobile phones do not automatically reconnect after being restarted (hard re-
boot)
.
Your mobile phone can still be connected manually
.
Close all applications that
may be operating (refer to mobile phone manufacturer’s instructions), and follow “Pair-
ing (Wirelessly Connecting) Your Mobile Phone To The Uconnect System
. ”
Mobile Phone won’t pair to system:
• Perform a hard reset in the mobile phone by removing the battery (if removable —
see your mobile phone’s owner manual) .
• Delete pairing history in mobile phone and Uconnect system; usually found in phone’s
Bluetooth connection settings .
• Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your mo-
bile phone .
• If your vehicle system generates a pin code the default is 0000
.
ELECTRONICS
134