48
GETTING TO KNOW YOUR VEHICLE
Panel Mode
Air comes from the outlets in the
instrument panel. Each of these
outlets can be individually adjusted to
direct the flow of air. The air vanes of
the center outlets and outboard outlets can be
moved up and down or side to side to regulate
airflow direction. There is a shut off wheel
located below the air vanes to shut off or adjust
the amount of airflow from these outlets.
Floor Mode
Air comes from the floor outlets. A
slight amount of air is directed
through the defrost and side window
demister outlets.
Bi-Level Mode
Bi-Level Mode is obtained by pressing
both the Panel Mode button and the
Floor Mode button, activating them
both. Air comes from the instrument
panel outlets and floor outlets. A slight amount
of air is directed through the defrost and side
window demister outlets.
NOTE:
Bi-Level Mode is designed under comfort condi
-
tions to provide cooler air out of the panel
outlets and warmer air from the floor outlets.
Mix Mode
Mix Mode is obtained by pressing
both the Windshield Mode button and
the Floor Mode button, activating
them both. Air is directed through the
floor, defrost, and side window demister
outlets. This setting works best in cold or snowy
conditions that require extra heat to the
windshield. This setting is good for maintaining
comfort while reducing moisture on the
windshield.
Hi-Level Mode
Hi-Level Mode is obtained by pushing
the Defrost Mode button and the
Panel Mode button. Air comes from
the instrument panel outlets and the
defrost outlets. A slight amount of air is directed
through the side window demister outlets.
Tri-Level Mode
Tri-Level Mode is obtained by pressing
the Defrost Mode button, the Panel
Mode button, and the Floor Mode
button. Air comes from the instrument panel
outlets, the defrost outlets, and floor outlets. A
slight amount of air is directed through the side
window demister outlets.
Climate Control Power Button
Press and release the Climate Control
Power button to turn the Climate
Control on/off.
M
ANUAL
C
LIMATE
C
ONTROL
D
ESCRIPTIONS
A
ND
F
UNCTIONS
Manual Climate Controls
MAX A/C Setting
Set the temperature control knob to
the MAX A/C setting to change the
current setting to the coldest output
21_FD_OM_EN_USC_t.book Page 48
