Fiat 500L 2020, Owner'S Manual

Page: 238 / 284

236 MULTIMEDIA
Info
Press the Info button on the touchscreen to
display the current track information. Press the
Info button on the touchscreen a second time to
cancel this feature.
Tracks
Press the Tracks button on the touchscreen to
display a pop up with the Song List. The
currently playing song is indicated by an arrow
and lines above and below the song title. When
in the Tracks List screen you can rotate the
Tune/Scroll knob to highlight a track (indicated
by the line above and below the track name)
and then push the Enter/Browse knob to start
playing that track.
Pressing the Tracks button on the touchscreen
while the pop up is displayed will close the pop
up.
Audio
Refer to Radio Mode in this section for adjusting
the audio settings.
AUX Mode
Overview
AUX (Auxiliary Mode) is entered by inserting an
AUX device using a cable with a 3.5 mm audio
jack into the AUX port or by pressing the AUX
button on the left side of the display.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the
AUX Port. If you insert an Auxiliary device with
the ignition ON and the radio ON, the unit will
switch to AUX mode and begin to play when you
insert the device cable if the device is already
playing.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g.,
selecting playlists, play, fast forward, etc.)
cannot be provided by the radio; use the device
controls instead. Adjust the volume with the
Volume/Mute rotary knob, or with the volume of
the attached device.
NOTE:
The radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore if the
volume control on the Auxiliary device is set too
low, there will be insufficient audio signal for the
radio unit to play the music on the device.
Media Mode
Press the Media button on the touchscreen to
select the desired audio source: AUX.
Audio
Refer to Radio Mode in this section for adjusting
the audio settings.
Bluetooth® Mode
Overview
Bluetooth® Streaming Audio (BTSA) or Blue
-
tooth® Mode is entered by pairing a Bluetooth®
device, containing music, to the Uconnect
System.
Before proceeding, the Bluetooth® device must
be paired to the Uconnect Phone to communi -
cate with the Uconnect System.
20_BG_OM_EN_US_t.book Page 236