EXTERIOR LIGHTS
Headlights
The multifunction lever, located on the left side of
the steering wheel, controls the operation of the
headlights, headlight high beams, lane change assist
and turn signals
.
NOTE:
The external lights can only be turned on with the
ignition in the MAR (ACC/ON/RUN) position
.
Rotate the end of the multifunction lever upward
to the first detent for headlight operation
.
NOTE:
When the headlights are turned on, the Daytime
Running Lights will be deactivated
.
Daytime Running Lights — If Equipped
To activate the Daytime Running Lights (DRL),
rotate the end of the multifunction lever to the
O
symbol
.
NOTE:
The low beams and side/tail lights will not be on
with DRL
.
The DRL function can be turned on or off
through the touchscreen
.
Refer to your Uconnect
Supplement Manual for further information
.
High Beams
With the low beams activated, push the multi-
function lever forward (toward the front of the
vehicle) to turn on the high beams
.
The lever will
remain forward in a fixed position and the telltale
will illuminate in the instrument cluster display
.
Pull the multifunction lever rearward (toward the
rear of the vehicle) to turn off the high beams
.
Turn Signal/Lights Lever
1 — Turn Signals
2 — High Beams
3 — Flash-To-Pass
4 — Headlights
GETTING
T
O
KNO
W
Y
OUR
VEHICLE
18
