VEHICLE SECURITY ALARM
The Vehicle Security Alarm monitors the vehicle doors for unauthorized entry and the
Keyless Enter-N-Go™ START/STOP button for unauthorized operation
.
While the Vehicle
Security Alarm is armed, interior switches for door locks and decklid release are disabled
.
If something triggers the alarm, the Vehicle Security Alarm will provide the following
audible and visible signals: the horn will pulse, the park lamps and/or turn signals will flash,
and the Vehicle Security Light in the instrument cluster will flash
.
To Arm The System:
Push the Key Fob LOCK button
.
To Disarm The System:
Push the Key Fob UNLOCK button or cycle the ignition to the ON/RUN position
.
The Vehicle Security Alarm is designed to protect your vehicle
.
However, you can create
conditions where the Vehicle Security Alarm will give you a false alarm
.
If one of the
previously described arming sequences has occurred, the Vehicle Security Alarm will arm
regardless of whether you are in the vehicle or not
.
If you remain in the vehicle and
open a door, the alarm will sound
.
If this occurs, disarm the Vehicle Security Alarm
.
If the Vehicle Security Alarm is armed and the battery becomes disconnected, the Vehicle
Security Alarm will remain armed when the battery is reconnected
.
The exterior lights
will flash, and the horn will sound
.
If this occurs, disarm the Vehicle Security Alarm
.
POWER DOOR LOCKS
•
Push the central LOCK/UNLOCK button located on the instrument panel, in the
switch bank below the radio
.
The button has an LED that indicates whether the doors
are locked or unlocked
.
•
LED ON:
doors locked
.
Pushing the central LOCK/UNLOCK button once will unlock
all doors
.
The LED will switch off once the doors are unlocked
.
•
LED OFF:
doors unlocked
.
Pushing the central LOCK/UNLOCK button once will lock
all doors
.
The LED will switch on once the doors are locked
.
•
Once the doors have been locked with the RKE transmitter, it will no longer be pos-
sible to unlock them by pushing central LOCK/UNLOCK button
.
NOTE:
With central locking active (LED ON), opening one of the front doors, it is possible to
perform a central unlocking (LED OFF)
.
With central locking active (LED ON), in order
to open one of the rear passenger doors, it is necessary pulling the internal door handle
twice
.
With one of the rear door open (LED OFF), the unlocking is performed only for
that door, not for all the vehicle
.
GETTING STARTED
9
Summary of Contents for 500L 2015
Page 145: ...NOTES 143...
Page 146: ...NOTES 144...
