Fiat 500L 2012, Owner'S Handbook Manual

Page: 92 / 348

CONTROLS
Driver side front door
A fig. 76: front left window opening/closing.
"Automatic continuous" operation during window
opening/closing, while ignition key is in MAR-ON
position;
B: front right window opening/closing. "Automatic
continuous" operation during window opening/
closing, "manual" operation only during window
closing;
C: enabling/disabling of rear door electric window
controls
D: rear left window opening/closing (for versions/
markets, where provided). "Automatic continuous"
operation during window opening/closing, "manual"
operation only during window closing;
E: rear right window opening/closing (for versions/
markets, where provided). "Automatic continuous"
operation during window opening/closing, "manual"
operation only during window closing.
Use the buttons to open/close the desired window.
When one of the two buttons is pressed briefly,
the window moves in stages; if the button is held
down, "continuous automatic" operation is activated
both for closing and opening (only with ignition
key at MAR-ON and in circumstances which permit
automatic operation).
If the button is pressed again, the window will stop in
the desired position.
Front and rear passenger doors
(for versions/markets, where provided)
On the passenger side front door panel trim, and on
some versions also on the rear doors, buttons are
provided to control the associated windows.
Electric window system initialisation
The initialisation procedure must be carried out with
the doors closed and for each door, as described
below:
❒
fully close the window to be initialised, with
manual operation;
❒
after the window has reached the upper end of
travel, hold the up button pressed for at least
one second.
fig. 76
F0Y0240
88
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX