Fiat 500L 2012 Owner'S Handbook Manual Download Page 74

Page: 74 / 348

Flashing of programmed speed

The programmed speed flashes in the following
cases:

❒

when the accelerator pedal has been fully
depressed and the car speed has exceeded
programmed speed;

❒

when the device cannot reduce the speed of the
car due to the gradient of the road;

❒

in the event of sharp acceleration.

Deactivating the device

To deactivate the device, turn ring nut A to

The deactivation of the device is indicated by the

warning light switching off on the instrument

panel and, on some versions, by a message and

symbol on the display.

Automatic deactivation of device

The device deactivates automatically in the event of
fault in the system.

ROOF LIGHTS

FRONT ROOF LIGHT

Switch A fig. 49 switches the roof lights on/off.
A switch positions:

❒

central position: lights C and E switch on/off when
the doors are opened/closed;

❒

pressed to the left (position OFF): lights C and E
are always switched off;

❒

pressed to the right (position

): lights C and D

are always switched on.

The lights switch on/off gradually.
Switch B switches on/off light C.
Switch D switches on/off light E.

fig. 49

F0Y0098

GETTING TO

KNOW YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

Summary of Contents for 500L 2012





























































































































































































































































































































































Search results

Summary of Contents for 500L 2012

Reviews:

Related manuals for 500L 2012

Brands by name

Popular brands

Fiat 500L 2012, Owner'S Handbook Manual

Search results

Summary of Contents for 500L 2012

Reviews:

Related manuals for 500L 2012

Brands by name

Popular brands