Tire Pressures For High Speed Operation
The manufacturer advocates driving at safe speeds and within posted speed limits
.
Where
speed limits or conditions are such that the vehicle can be driven at high speeds, main-
taining correct tire inflation pressure is very important
.
Increased tire pressure and re-
duced vehicle loading may be required for high-speed vehicle operation
.
Refer to your
authorized tire dealer or original equipment vehicle dealer for recommended safe operat-
ing speeds, loading and cold tire inflation pressures
.
WARNING!
High speed driving with your vehicle under maximum load is dangerous
.
The added
strain on your tires could cause them to fail
.
You could have a serious collision
.
Do not
drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph
(120 km/h)
.
Radial Ply Tires
WARNING!
Combining radial ply tires with other types of tires on your vehicle will cause your ve-
hicle to handle poorly
.
The instability could cause a collision
.
Always use radial ply tires in
sets of four
.
Never combine them with other types of tires
.
Tire Repair
If your tire becomes damaged, it may be repaired if it meets the following criteria:
•
The tire has not been driven on when flat
.
•
The damage is only on the tread section of your tire (sidewall damage is not repair-
able)
.
•
The puncture is no greater than a ¼ of an inch (6 mm)
.
Consult an authorized tire dealer for tire repairs and additional information
.
Damaged Run Flat tires, or Run Flat tires that have experienced a loss of pressure should
be replaced immediately with another Run Flat tire of identical size and service descrip-
tion (Load Index and Speed Symbol)
.
MAINTAINING YOUR VEHICLE
142
Summary of Contents for 500e 2017
Page 162: ...NOTES 160...
