FLUID CAPACITIES
Systems
U.S.
Metric
Power Electronics Cooling System
3
.
6 Quarts
3
.
5 Liters
Battery Thermal Management Cooling System
7
.
0 Quarts
6
.
7 Liters
Single-Speed Transmission
0
.
8 Quart
750 ml
FLUIDS, LUBES, AND GENUINE PARTS
Component
Fluid, Lubricant, or Genuine Part
Coolant
MOPAR Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT (Organic Addi-
tive Technology) or equivalent meeting the
requirements of FCA Material Standard
MS
.
90032
.
Brake Master Cylinder
MOPAR DOT 3, SAE J1703 should be
used
.
If DOT 3, SAE J1703 brake fluid is
not available, then DOT 4 is acceptable
.
Use only recommended brake fluids or
equivalent
.
Refrigerant
MOPAR R134a
Compressor Lubricant
MOPAR POE Oil or Equivalent meeting
the requirements of FCA Material Stan-
dard MS-12727
Single-Speed Transmission
Castrol BOT 533
CAUTION!
•
Mixing of coolant (antifreeze) other than specified Organic Additive Technology (OAT)
coolant (antifreeze), may result in cooling system damage and may decrease corrosion
protection
.
Organic Additive Technology (OAT) coolant is different and should not be
mixed with Hybrid Organic Additive Technology (HOAT) coolant (antifreeze)
.
If a non-
OAT coolant (antifreeze) is introduced into the cooling system in an emergency, it
should be replaced with the specified coolant (antifreeze) as soon as possible
.
•
Do not use water alone or alcohol-based coolant (antifreeze) products
.
Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator coolant and may plug the radiator
.
•
This vehicle has not been designed for use with propylene glycol-based coolant (anti-
freeze)
.
Use of propylene glycol-based coolant (antifreeze) is not recommended
.
MAINTAINING YOUR VEHICLE
102