Fiat 500 ABARTH CABRIO 2017, User Manual

Page: 97 / 172

PROGRAMMABLE FEATURES
Instrument Cluster Display
The instrument cluster display can be used to program the following Personal
Settings. Push the
MENU
button until menu is displayed, then push the
up
or
down arrow button to scroll through the settings.
Once the menu setting is shown in the instrument cluster display push the
MENU
button to access the setting and use the up or down arrow button to change the
current setting. The menu includes the following functions:
• Speed Beep • Buzzer Volume
• Trip B Data • Button Volume
• See Radio (Repeat Audio Information) • Tire Pressure
• Speed Display
• Hill Start
• Autoclose • Exit Menu
Uconnect Customer Programmable Features
The Uconnect system allows you to access Customer Programmable feature
settings.
To change a setting:
1. Push the SETTINGS
button located on the right side of the display.
2. Select a programmable feature you would like to adjust.
3. Make your selection highlighting the button.
Depending on the vehicles options, the following feature settings are available:
• Display • Audio
• Clock & Date • Phone/Bluetooth
• Safety/Assistance • SiriusXM Setup
• Lights • Voice
• Doors & Locks • Restore Settings
• Engine Off Options • Units
• Clear Personal Data
Refer to “Uconnect Settings” in “Understanding Your Instrument Panel” in your
Owner’s Manual on www.fiatusa.com/en/owners/manuals for further information.
ELECTRONICS
95