Fiat 500 ABARTH CABRIO 2017, User Manual

Page: 94 / 172

Voice Text Reply (Not Compatible With iPhone)
NOTE:
Voice texting reply and voice texting features require a compatible mobile device enabled
with Bluetooth Message Access Profile (MAP). iPhone, and some other smartphones,
may not entirely support Bluetooth MAP. Visit UconnectPhone.com for the latest system
and device compatibility.
• Due to the extremely large number of mobile phone manufacturers, your mobile
device may not be listed. For further assistance, contact Uconnect Customer
Care at1-877-855-8400 for U.S. residents or, 1-800-465-2001 (English) /
1-800-387-9983 (French) for Canadian residents.
Once your Uconnect system is paired with a compatible mobile device, the system
can announce a new incoming text message, and read it to you over the vehicle
audio system. You can reply to the message using Voice Recognition by selecting,
or saying, one of the 18 pre-defined messages.
Here’s How:
1. Push the Uconnect Phone button and wait for the beep, then say “reply.”
Uconnect will give the following prompt: “Please say the message you would like
to send.”
2. Wait for the beep and say one of the pre-defined messages. (If you are not sure,
you can say “help”). Uconnect will then read the pre-defined messages allowed.
3. As soon as you hear the message you would like to send, you can interrupt the
list of prompts by pushing the Uconnect phone button and saying the phrase.
Uconnect will confirm the message by reading it back to you.
4. Push the Phone button and say “send.”
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes. Stuck in traffic. See you later.
No. Start without me. I’ll be late.
Okay. Where are you?
I will be <5, 10, 15,...etc.>
minutes late.
Call me. Are you there yet?
I’ll call you later. I need directions.
See you in <5, 10,
15,...etc.> of minutes.
I’m on my way.
Can’t talk right now.
I’m lost. Thanks.
NOTE:
To make the SMS voice reading function available, the SMS notification option on your
phone must be enabled; this option is usually available on the phone, in the Bluetooth
connections menu for a device registered as Uconnect. After enabling this function on
the mobile phone, it must be disconnected and reconnected with the Uconnect system
in order to make it effective.
ELECTRONICS
92