24
FIG.1
FIG.3
To re-enable ALL the radio controls you must:
access the “programming” facility
A.
with the door open, keep your finger pressed on spring latch
and place
the TAG
(or “master” numeric code) near to the receiver located on the
external plaque
(fig. 1).
B.
The acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the “programming” mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C.
Keeping the spring latch
constantly pressed, press the black key locat-
ed on the internal plaque
(fig. 3) for at least one second until the buzzer
emits two short beeps.
All the radio controls stored in the electronic memory are now re-enabled
to open the lock.
This operation also simultaneously re-enables any TAG and numer-
ic code being used.
release the pressure on the spring latch
to exit the programming mode.
5
P
1
4
5
p
2
5
BASIC PROGRAMMING