Page
12
of
28
Cleaning of Auto Fill Pass-Thru machines
1.
The water drawer should be removed daily for cleaning.
TAKE CARE WHEN REMOVING THE WATER DRAWER
Gently lift the front of the water drawer and then slide drawer out of machine, the water will
cut-off automatically when the drawer is removed. Next drain water in to a sink. The water
pan can be removed from the drawer by carefully lifting the float and then removing the pan.
Be careful not to damage float and mechanism.
With the water draw removed the rest of the removable pieces can be removed, Once the
parts have all been removed these can be cleaned in warm soapy water (soak the parts in
warm soapy water if required).
CARE MUST BE TAKEN WHEN CLEANING THE INTERIOR OF THE MACHINE
BECAUSE ELEMENTS, PANELS ETC. MAY REMAIN HOT FOR SOMETIME AFTER THE
HEATING HAS BEEN SWITCHED OFF.
Summary of Contents for Vizu 400 Pass Through Multi Stack
