Page 24
• Could not get sensor readings
An error occurred while reading the recorded sensor values
from the Flame Detector.
• Sensor readings too low
The average of the sensor readings is improbably low. The
Flame Detector should be returned for servicing.
• Sensor readings too high
The average of the sensor readings is improbably high. The
Flame Detector should be returned for servicing.
• Sensor readings too noisy
The variation in the sensor readings is improbably high. The
Flame Detector should be returned for servicing.
• Unit overheating
The temperature in the TalentumTT
2
is too high. Recalibration
will be abandoned for safety. Allow the TalentumTT
2
to cool
down before attempting another test or recalibration. The
bulbs heat up during use; running them constantly without a
short break could cause the TalentumTT
2
to shut down.
• Could not write calibration
The TalentumTT
2
could not write the calibration values back
to the Flame Detector. The Flame Detector may need to be
returned for servicing.
• Could not write cal history
The TalentumTT
2
could not write information about this
calibration back to the Flame Detector.
