Go to fetco.com for the latest versions of all information
Page 3
User Guide & Operator instructions
P194
Re0
January 2021
Starting The Brew
1. Turn the power switch “ON”.
2. Prepare a brew basket with the correct size
filter and appropriate amount of coffee.
3. Slide the brew basket completely into the
rails.
4. Place a clean, empty, preheated dispenser
under the brew basket.
5. Select a batch & hold the corresponding BREW button in
for 1 second to start
6. -STOP button will illuminate, Brew Selector button will illuminate
-Countdown time will display. Default time setting is 6:00 (six minutes)
-Selected BREW button will slowly pulsate to indicate brew is in progress.
-All other BREW buttons for that brew head will be unlit.
7. When the brew cycle is finished,
STOP
button will extinguish and the BREW button will
continue to pulsate to indicate
DRIP will display to show the 2:00 (two minutes) drip delay setting.
This
indicates that coffee may still be dripping from
the brew basket
For safety- do not remove brew basket until drip-out is complete.
Enter Programming
There are 7 menu groups-A-F plus EXIT (G).
See the following pages for the batch parameter definitions and all settings for the brewer
TO ENTER PROGRAMMING
1-Turn brewer “OFF” from power switch
2-Turn power switch to “ON”
…Screen will initialize and then
display digital process notifications
3-After Initialization- “STOP” Lamp turns on
4-Quickly press “STOP” button (no need to hold)
When brewer is In PROGRAMMING MODE
-the screen will display:
|BATCH PRG|
|A
(or B-F)
|
-
Illuminated LED indicates active keypad positions
See the following pages for batch parameter
definitions and all settings for the brewer
Exit Programming & Save Control Setting Changes
From any screen-
Press STOP button
until the EXIT (“G”)
screen appears
From the “G” screen
Press button
2
to
toggle to the EXIT-
YES
screen
From EXIT screen
Press button
1
to
toggle to the SAVE
screen
From SAVE screen
Press button
2
to
toggle to the SAVE-
YES
screen
To SAVE and EXIT
Press button
1
to
SAVE your changes
and EXIT to
OPERATING MODE
STOP
Programming A-F
A-F
STOP
EXIT
G
NO +
STOP
EXIT
G
YES -
STOP
SAVE
G
NO +
STOP
SAVE
G
YES -
STOP
FETCO
Ready to Brew
STOP
Brewing
5:30
STOP BUTTON
↓
ON/OFF switch
is located on
lower right on
back of brewer
STOP
CBS-1221
Ver.3.0.2019
STOP
Batch Program
A
