10
user is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
– Consult the dealer or an experienced radio/TV
technician for help.
Health hazard by dust
WARNING!
Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically treated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
Intended use
Cordless drill suitable
– for screwing in and tightening screws,
– for drilling in metal, wood, plastics and similar
materials.
Not intended
for clamping tools other than drills
and drill bits, e.g. compass saws, stirring rods,
metal brushes.
Charger MXC suitable
– for charging the listed battery packs.
– only for indoor use.
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
Technical data
* Speed specifications with fully charged battery
pack.
Further technical data on the charger and
the supplied battery pack can be found on
the fold-out page.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Cordless drills
TXS
Motor voltage
10.8 V
Idle engine speed*
1st gear
0 - 430 rpm
2nd gear 0 - 1300 rpm
Max. torque
soft/hard screw joints
10/ 16 Nm
Adjustable torque
0.3 - 3.4 Nm
Chuck clamping range
1 - 10 mm
Drill diameter max.
Wood/Metal
12/ 8 mm
Tool holder in drill spindle
1/4 ’’
Weight without battery pack with
Centrotec
0.7 kg
Cordless drills
TXS