20
TS 75
7.4
Plaster and cement-bonded fibre boards
Due to the high build-up of dust, use of a cover
ABSA-TS55 (accessory) mounted to the side of the
protective cover is recommended.
8
Accessories
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under “www.festool.com”.
8.1
Parallel stop, table widener
A parallel stop can be used for section widths up
to 180 mm. The parallel stop can also be used as
a table widener.
8.2
Guide system
The guide rails, which are available in different
lengths, allow for precise, clean cuts and
simultaneously protect the workpiece surface
against damage.
In conjunction with the extensive range of acces-
sories, exact angled cuts, mitre cuts and fitting
work can be completed with the guide system. The
option of attaching the guide rail securely using
clamps
[6-4]
ensures safer working conditions.
X
Adjust the guide play between the saw table
and the guide rail using the two adjustable
jaws
[1-3]
.
Bed in the splinterguard [1-4] before using the
guide rail for the first time:
X
Set the machine speed to 6.
X
Place the machine at the rear end of the guide
rail together with the complete guide plate.
X
Switch on the machine.
X
Push down the machine slowly to the max.
preset cutting depth and cut along the full
length of the splinterguard without stopping.
The edge of the splinterguard now corresponds
exactly to the cutting edge.
8.3
Multifunction table
The multifunction table MFT/3 makes clamping
the workpiece easy and allows you to saw large
and small workpieces safely and precisely using
the guide system. Its many fields of application
make economical and ergonomically convenient
work possible.
8.4
Saw blades, other accessories
In order to saw different materials quickly
and cleanly, Festool offers saw blades for all
applications that are specially designed for your
Festool portable circular saw.
9
Maintenance and care
WARNING
Risk of injury, electric shock
X
Always disconnect the mains plug from the
socket before performing maintenance work
on the machine!
X
All maintenance and repair work which
requires the motor housing to be opened must
only be carried out by an authorised service
workshop.
Customer service and repair.
Only
through manufacturer or service work-
shops: Please find the nearest address
at: www.festool.com/Service
EKAT
1
2
3
5
4
Use only original Festool spare parts!
Order No. at: www.festool.com/Service
The machine is equipped with special carbon
brushes. If they are worn out, the power is inter-
rupted automatically and the machine comes to
a standstill.
Observe the following instructions:
X
To ensure constant air circulation, always keep
the cooling air openings in the housing clean
and free of blockages.
X
Use an extractor on all the openings of the
machine to remove wood chips and splinters.
10
Environment
Do not throw the power tool in your
household waste!
Dispose of the
machine, accessories and packaging
at an environmentally-responsible
recycling centre! Observe the valid
national regulations.
