18
CTM 48 E LE EC, CTL 48 E LE EC
GB
9.1
Changing the filter element
Open the locking clips
[2-2]
and remove the top
section of the machine
[2-1]
.
Turn the top section of the machine so that the
main filter is facing upwards (Fig.
[7]
).
Fold over the lever
[7-3]
and remove the retainer.
[7-2]
Remove the used main filter and replace
[7-1]
with a new one.
Dispose of the used filter in accordance with stat-
utory regulations.
Insert the retainer
[7-2]
and fold over the lever
[7-3]
until it engages.
Replace the top section
[2-1]
and close the lock-
ing clips
[2-2]
.
9.2
Changing the cooling air filter [8]
Replace the cooling air filter if the mobile dust ex-
tractor switches off due to excess temperature and
replace at least once a year.
We recommend that you always replace the cool-
ing air filter together with the main filter.
Unscrew the cooling air cover
[8-1]
.
Remove the cooling air filter and replace with a
new one!
Close the cooling air cover.
9.3
Emptying the dust container
The dust container
[2-3]
can be emptied once the top
section has been removed.
After extracting fluids, clean the fill level sensors
[9-1]
regularly with a soft cloth and inspect for
damage.
10
Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifically
for the machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your working results and limit any war-
ranty claims. Machine wear or your own personal
workload may increase depending on the application.
Protect yourself and your machine, and preserve
your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
The order numbers for the accessories and filters
can be found in the Festool catalogue or on the Inter-
net at "www.festool.com".
11
Environment
Do not dispose of the device in house-
hold waste!
Recycle devices, accesso-
ries and packaging. Observe applicable
national regulations.
EU only:
In accordance with European
Directive on waste electrical and electronic equip-
ment and implementation in national law, used elec-
tric power tools must be collected separately and
handed in for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
12
EU Declaration of Conformity
We declare under sole responsibility that this product
complies with all the relevant requirements in the
following Directives, standards and normative docu-
ments:
2006/42/EC, 2004/108/EC, 2011/65/EU, EN 60335-1,
EN 60335-2-69, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical Docu-
mentation
2014-05-16
NOTE
Motor damage
Never operate the extractor without a filter ele-
ment fitted as the motor may become damaged.
Mobile dust extractor
Serial no.
CTM 48 E LE EC
497843
CTM 48 E LE EC IND.
497844
CTL 48 E LE EC
498538. 497845
Year of CE mark: 2011
