19
Insert the retainer
[7-2]
and fold over the lever
[7-3]
until it engages.
Replace the top section
[2-1]
and close the
locking clips
[2-2]
.
9.2
Changing the cooling air filter [8]
Replace the cooling air filter if the mobile dust ex-
tractor switches off due to excess temperature and
replace at least once a year.
We recommend that you always replace the
cooling air filter together with the main filter.
Unscrew the cooling air cover
[8-1]
.
Remove the cooling air filter and replace with a
new one!
Close the cooling air cover.
9.3
Emptying the dust container
The dust container
[2-3]
can be emptied once the
top section has been removed.
After extracting fluids, clean the fill level sen-
sors
[9-1]
regularly with a soft cloth and inspect
for damage.
10
Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine.
These components are designed specifically for
this machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your results and limit warranty
claims. Machine wear or your own personal work-
load may increase depending on the application.
Protect yourself and your machine, and preserve
your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
CTM 48 E LE EC/B22, CTL 48 E LE EC/B22
GB
The order numbers for the accessories and filters
can be found in the Festool catalogue or on the In-
ternet at "
".
11
Environment
Do not dispose of the device in house-
hold waste!
Recycle devices, accesso-
ries and packaging. Observe applicable
national regulations.
EU only:
In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
12
EU Declaration of Conformity
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following directives, standards and normative
documents:
2006/42/EC, 2004/108/EC, 94/9/EC, 2011/65/EU,
EN 60335-1, EN 60335-2-69, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-3.
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
WARNING
Use of non-approved accessories and spare parts
Danger of explosion
For mobile dust extractors of design type 22 only
accessories and spare parts approved by Festool
especially for this purpose can be used - see
listed consumables, accessories list and spare
parts catalogue.
Mobile dust extractor
Serial no.
CTM 48 E LE EC/B22
496974
CTL 48 E LE EC/B22
498533, 497842
Year of CE mark: 2011