10
CT 17 E
Original operating instructions
1
Safety instructions
Warning! Read and observe all information and safety instructions.
Ignoring
warning notes and instructions may lead to electric shocks, fires and/or cause
serious injury.
Keep all safety information and other instructions in a safe place for future
reference.
– This device can be used by persons with reduced physical, sensory or mental
abilities or those who lack experience or knowledge, if they are supervised or
have been instructed on safe use of the device and understand the resulting
dangers.
Children
should always be supervised to ensure that they do not play
with the machine.
–
Risk of explosion and fire hazard: do not extract
sparks or hot dust, flammable
or explosive dust (e.g. magnesium, aluminium, petrol, thinner, with the
exception of wood), aggressive fluids/solids (e.g. acid, leach, solvent).
– Observe all national safety regulations as well as the material manufacturer’s
specifications!
– Not suitable for extracting hazardous dust.
– Always use suitable protective equipment!
– If intact following a visual inspection, work in a dry environment according to
instructions!
–
WARNING! Operating personnel must receive instructions on how to use
the device.
Prior to use, operating personnel must receive information and
instructions on how to use the device and handle any materials involved as well
as relevant training, including safe procedures for disposing of the extracted
materials.
– If foam or fluid starts to escape, switch off the machine immediately.
– Clean the fill level sensors
[7]
and inspect for damage at regular intervals.
– Not suitable for extracting fluids that foam excessively.
– Always operate with the filter system installed.
– Always use the socket on the machine for the purpose specified!
– Check the plug and the cable regularly and should either become damaged,
in order to avoid a hazard, have them replaced by an authorised after-sales
service workshop.
– Do not lift or transport using a crane hook or lifting gear!
– If a fault occurs immediately turn off the device, disconnect from the mains,
and get checked and repaired by an authorised after-sales service workshop.
