Festo — YXCR — 2021-07b
Assembly
45
6.5.1
Mounting X-module
Requirements:
–
The mounting surface is prepared.
–
The required number of mounting components is pre-assembled on the X-axes.
–
Use only the supplied mounting components.
–
The transportation kit for lifting the product is mounted.
–
The moving parts are secured with the transportation locks.
Product version with EGC axes
1
2
3
Fig. 46: X-module EHMX-EGC-...-L, motor position
left
1
Connecting shaft with motor
2
X-axis with energy chain
3
X-axis
1
2
3
Fig. 47: X-module EHMX-EGC-...-R, motor
position right
1
Connecting shaft with motor
2
X-axis
3
X-axis with energy chain
1
3
2
Fig. 48: X-module EHMX-EGC-...-M, motor
position centre
1
Connecting shaft with motor
2
X-axis with energy chain
3
X-axis
