Terminal
Connection
Use
X4.4
…
X4.7
Not assigned
–
1) For details, see online help
2) Process termination if input = FALSE.
Tab. 11 I/O interface connection
Ethernet interface [X8]
The Ethernet interface is designed as an RJ45 socket and supports gigabit LAN.
The following protocols are supported:
–
EtherNet/IP (Server)
–
Modbus TCP (Server)
–
Ethernet TCP/IP
–
PROFINET IO
–
OPC UA (Only possible with the optional software extension package.)
The interface [X10] of the controller is not supported. The controller cannot be used as a switch.
The Ethernet interface is used to configure and parameterise the system through a PC/tablet connec-
ted to the network. After the mechanical and electrical installation, the servo press kit can be commis-
sioned with a web browser. Control and process data can be exchanged with a higher-order controller
through this interface during the run-time of the system.
A requirement for this is integration of the CECC-X-M1-YS in the local network.
Minimum requirements for a PC/tablet
–
Web browser with Java Script and support of HTML5 Canvas, e.g. Firefox, Chrome, Internet
Explorer
³
Version 9
–
Screen resolution 1024 x 768 pixels
Access is through entry in the address line: http://<<IP address>>:8080/servo_press_kit.htm
Example: http://192.168.4.2:8080/servo_press_kit.htm
NOTICE!
Unauthorised access to the device can cause damage or malfunctions.
When connecting the device to a network, protect the network from unauthorised access.
Measures to protect the network include:
•
Firewall
•
Intrusion Prevention System (IPS)
•
Network segmentation
•
Virtual LAN (VLAN)
•
Virtual Private Network (VPN)
•
Security at physical access level (Port Security)
USB interface [X9]
The controller offers the option of connecting the USB memory stick up to 32GB to the USB interface
[X9] and saving the press results.
Installation
19
Festo — YJKP — 2019-01e
