Assemble the sensor SKDA
Fig. 6 Sensor SKDA
è
Pay attention to the accompanying documentation for SKDA.
è
1. Do not screw the lock nut up to the stop on the ESBF-BS.
2. Screw the sensor on the ESBF-BS.
3. Apply the lock nut to secure the sensor.
Additional steps
1. Insert the memory card (microSD card) into the CECC-X-M1-YS.
2. Assemble the CECC-X-M1-YS.
è
Pay attention to the accompanying documentation for the CECC-X-M1-YS.
è
3. Assemble the CMMP-AS.
è
Accompanying documentation for the CMMP-AS.
è
Up-to-date information on the accessories
è
www.festo.com/catalogue.
8
Installation
8.1
Safety
WARNING!
Risk of injury due to lowering piston rod.
•
Before working on the product: Secure the piston rod to prevent it from lowering.
WARNING!
Risk of injury due to unexpected movement of the product.
Electrical energy can cause unexpected movement of the product.
•
Before working on the product: Switch off the power supply, ensure that it is off and secure it
against being switched on again.
Installation
11
Festo — YJKP — 2019-01e
