Connection, reference sensor
Connect the proximity switch SMT-8M-A-PS-24V -...- M8D, which serves as a reference sensor, to the
control system with a connecting cable [-WD6].
SMT-8M-A-PS-24V-...-OE
Pin
Signal
1
24 V DC supply
3
Switching output
4
GND
Tab. 4 Connection, reference sensor
Ethernet interface
NOTICE!
Unauthorised Access to the Device Can Cause Damage or Malfunction.
•
When connecting the device to a network, protect the network from unauthorised access.
Standards for security in information technology can be used for network protection meas-
ures, e.g. IEC 62443, ISO/IEC 27001.
The Ethernet interface of the balancer controller CECC-D-BA is a RJ-45 socket and is used for the con-
figuration and parameterisation of the system with a PC or tablet connected to the network.
After the mechanical and electrical installation, the servo-pneumatic balancer can be commissioned
with a web browser. The prerequisite is that the integrated controller CECC-D-BA is integrated in the
local network.
Access is through entry in the address line: http://<<IP address>>:8080/webvisu.htm
Example: http://192.168.2.20:8080/webvisu.htm
Minimum requirements for a PC/tablet
–
Web browser with Java Script and support of HTML5 Canvas, e.g. Firefox, Chrome, Internet
Explorer
³
Version 9
–
Screen resolution 1280 x 768 pixels
Installation
13
Festo — YHBP — 2020-09
