Translation of the original instructions
1
Further applicable documents
All available documents for the product
è
www.festo.com/pk.
Observe further applicable documents:
–
Assembly instructions for separator VABD-...-B
2
Safety instructions
–
Only assemble the product on components that are in a condition to be safely
operated.
–
Do not interchange outputs 2 and 4 of the components during the mounting
procedure.
3
Product range overview
3.1
Included in delivery
1 Manifold rail (1x)
VABM-L1-...HWS1/2-...-GR
2 Blanking plug (1x)
3 Plug module (1x)
Fig. 1
3.2
Not included in the delivery
4 Supply plate
VABF-L1-...-P3A4-...-T1
5 Cover plate VABB-L1-...-T
6 Solenoid valve VUVG-...
Fig. 2
7 Fixed flow restrictor VFFG-T-F...
8 Check valve VABF-L1-...H-L2
9 QS fitting
10 Electrical interface VAEM-L1-S-...
11 Blanking plug B-M7
12 Screw M5x16-A2-70-PRES-IP
Fig. 3
4
Mounting
4.1
Preparation
•
Form pressure zones with the VABD-...-B
separator
è
1 Further applicable documents.
To feed additional operating pressure into the pressure zones or increase the
exhaust performance:
•
Mount supply plate
4
on manifold rail
1
.
In case of unused valve positions:
•
Mount cover plates
5
.
4.2
Assembly of blanking plug/plug module
Fig. 4
•
For dismounting of the plug module
3
, use the M4 thread (X).
With external pilot air:
•
Push plug module
3
into port 14 (A).
With internal pilot air:
1. Screw the blanking plug
2
into the port 14 (A).
Tightening torque: 1.5 Nm – 20
%
.
2. Screw both blanking plugs
aA
into the ports 14 (B).
4.3
Assembly of supply plate/cover plate/solenoid valve
Fig. 5
1. Place the components
4
/
5
/
6
on the manifold rail
1
.
2. Tighten the screws (C).
VABM-L1-
10HWS
14HWS
(C)
0.3 Nm
+
50
%
0.55 Nm ± 50
%
Tab. 1
3. If applicable, place additional components
4
/
5
/
6
as desired.
8080413
Manifold rail
VABM-L1-...HWS1/2-...-GR
8080413
2018-05a
[8080415]
Instructions | Assembly
Festo AG & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
