Festo VABA-10S6-X Series, Manual

Page: 152 / 196

5. CPX pneumatic interfaces
5−16
Festo P.BE−CPX−EA−E N en 0804g
Parameters of pneumatic interfaces types
CPX−GP−03−4.0, CPX−GP−CPA−... and VABA−10S6−X...
M od u l e p a r a m ete r s : M o ni t or in g t h e C P X m od u l e
Function no. 4828 + m * 64 + 0 m = module number (0
Ū
47)
Description Monitoring of the possible faults can be activated or deactivated (suppressed)
for each module independently. Active monitoring causes the following:
The fault is:
sent to the CPX bus node
displayed by the module common error LED.
Bit
2
3
Surveillance
Description
Undervoltage of valves (V
VAL
)
Short circuit at the valve (SCV)
[Monitor]
[Monitor Vval]
[Monitor SCV]
Values 1 = active
0 = inactive
Presetting: bit 2: active
bit 3: inactive
[Active]
[Inactive]
Note Monitoring can also be set for the complete CPX terminal
(see CPX system manual).
[...] = display in the Handheld
Tab.5/4: Monitoring the CPX module