Festo VABA-10S6-X Series, Manual

Page: 130 / 196

4. Digital CPX multi I/O modules
4−12
Festo P.BE−CPX−EA−EN en 0804g
Module pa r amete r s : Fail sa f e c h annel x
Function no. Access to these module parameters is made via protocol−specific functions
(see the manual for the bus node).
Description Fault mode channel x: Hold last state
Fault state (presetting)
Fault state channel x: Set output
Reset output (presetting)
Note With the aid of the so−called Fail safe parameterizing, you can specify the signal
status which the outputs are to assume in the event of field bus communication
faults (see also CPX system manual).
Tab.4/10: Fail safe channel x (channel−specific)
Module pa r amete r s : I dle mode c h annel x
Function no. Access to these module parameters is made via protocol−specific functions
(see the manual for the bus node).
Description Only relevant for certain field bus protocols
Idle mode channel x:
Hold last state
Idle state (presetting)
Idle state channel x: Set output
Reset output (presetting)
Note With the aid of the so−called Idle mode parameterization, you can determine the
signal status which the outputs are to assume when switching is made to the
Idle state (see also CPX system manual).
This parameter is not available with all field bus protocols.
Tab.4/11: Idle mode channel x (channel−specific)