Festo SOEL-RTD-Q50-PP-S-7L, Mounting And Operating Instructions, Page: 34 / 54

Festo SOEL-...1606d English 34
SOEL-
Optical data (typ.)
Operating range SOEL-RTD-Q50-PP-S-7L 80 ... 300 mm
Measuring range SOEL-RTD-Q50-PP-S-7L 220 mm
Resolution*1 0.3 mm
Linearity 0.75 mm
Light used Pulsed laser light, red 650 nm, MTBF>50,000h *2
Size of light spot See Illustr. 4 page 28
Ambient light Constant light 5000 lux as per EN 60947-5-2
Laser protection class 1 (EN 60825/1)
Electrical data (typ.)
Operating voltage U
B
18-30 V DC *
3
Power consumption (no load) ≤ 40 mA at 24 V DC
Signal outputs Q
1
/Q
2
(PNP, N.O. / N.C. selectable)
Output current Q
1
, Q
2
≤ 100 mA
Switching frequency Q
1
, Q
2
≤ 1 kHz
Response time Q
1
, Q
2,
Q
A
0.4 ms (when averaging = off) / 4 ms / 40 ms
Maximum capacitive load Q
1
, Q
2
< 100 nF
Pulse stretching Q
1
, Q
2
50 ms (when activated)
Analogue output Q
A
4-20 mA *
4
Temperature drift < 0.02% / °C
Protective circuits Reverse battery protection, short circuit protection
VDE protection class *
5
Power on delay ≤ 300 ms
Mechanical data
Housing material ABS, shock-resistant
Front screen PMMA
Protection IP 67 *
6
Ambient temperature range -10 to +60 °C
Storage temperature range -20 to +80 °C
Connection M12 connector, 8-pin
Weight approx. 43 g
*1 smallest, measurable difference
*2 at ambient temperature : +40 °C
*3 limit values
*4 recommended burden < 500 Ohm (apparent ohmic resistance )
*5 rating 50V DC
*6 with attached connector