Festo Smart cubic CPVSC1-VI, Manual

Page: 38 / 92

3. Installation
3−8
Festo P.BE−CPVSC−E N en 0301a
1
2
Fig.3/1: Fitting the tubing
Removing Proceed as follows:
Warning
If the pneumatic tubing is under pressure when connec
tions are loosened, it may perform sudden unexpected
movements, thereby causing injury to human beings.
·
Switch off the compressed air supply before disconnect
ing the pneumatic tubing on the CPV−SC valve terminal.
1. Loosen the locking screw or press the locking ring of the
screw connector.
2. Pull out the tubing.
3
3. Replace non−required screw connectors with blanking
plugs
3
.
Fig.3/2: Disconnecting the tubing