Festo Smart cubic CPA-SC Series, Manual

Page: 71 / 136

3. Installation
3−19
Festo P.BE−CPASC−EN en 0412b
Sizes of the pneumatic connections
Fit the screw connector or the silencers as shown in the
following table. Then connect the tubing.
CPA−SC valve terminal
Tubing Connection code
(ISO 5599) Connection
code (ISO 228) Connection
*)
Compressed air/
vacuum 1 G1/8" Screw connector on both sides of
the base block
External pilot air 12/14 M5 Screw connector on both sides of
the base block
Exhausting the
valves 3 or 5 G1/8" Screw connector on both sides of
the base block
for ducted exhaust
for silencers
Exhausting the
pilot air 82/84 M5 Screw connector on both sides of
the base block
for ducted exhaust
for silencers
Work air/vacuum 2/4 M5 With sub−base valves screw
connector on base block.
With semi−inline valves screw
connector on the valve.
Pressure
compensation L M3, M5 Screw connector on both sides of
the base block
The pressure compensation hole
must not be sealed with a
blanking plug.
*)
Depending on what you have ordered, the CPA−SC may already be fitted with QS screw connectors.
Tab.3/3: CPA−SC valve terminal: Assigning the connections