Festo SFC-LAC CO Series, Manual, Page: 85 / 328

4. The control panel (only type SFC−LAC−...−H2−...)
4−15
Festo P.BE−SFC−LAC−CO−EN en 0708NH
4.5.3 [Settings] [Homing paramet.]
Setting the homing method and the speed during reference
travel.
·
Observe the instructions in section 5.2.3.
[Homing paramet.] Parameter Description
[Homing method] switch negative Referencing to reference
switch at the retracted
end position with index
search = factory setting
slock negative Referencing to negative
fixed stop
slock positive Homing to positive fixed
stop
[Velocity v_rp] v_rp Speed for searching for
the reference point
[Velocity v_zp] v_zp Speed for moving to the
axis zero point
[SAVE...] save parameters in EEPROM
The maximum speed for homing is subject to built−in limits.