Festo SFC-LAC CO Series, Manual

Page: 46 / 328

2. Fitting
2−6
Festo P.BE−SFC−LAC−CO−EN en 0708NH
2.4 Notes on mounting electric drives
Please note the following documentation:
Operating instructions for the axis used
(e.g. linear module HME)
Instructions for the additional components
Warning
If a drive is mounted in a sloping or vertical position, loads
may fall down and injure somebody.
·
Check whether external safety measures are necessary
(e.g. toothed latches or moveable bolts).
You can then prevent the working load sliding down
suddenly if there is a power failure.
Make sure that:
·
the drive is fitted securely and is correctly aligned
·
the working space in which the drive and effective load
will move is of sufficient size for operation with a load
·
the effective load does not collide with any component of
the drive when the slide moves into the end position.