Festo SFC-DC series, Manual

Page: 14 / 202

Contents and general instructions
XII
Festo P.BE−SFC−DC−IO−EN en 0801a
Manuals for the Single Field Controller SFC−DC
This manual contains basic general information on operating,
fitting, installing and commissioning electric positioning
drives with the Single Field Controller type SFC−DC−.... It also
contains information on the functions of the I/O interface for
type SFC−DC−...−IO as well as on commissioning with the Festo
Configuration Tool software package.
Product variants are available for coupling to field bus sys
tems. Special information on this can be found in the manual
for the relevant product variant.
Information on components, such as the electric slide type
SLTE−... or the reference switch can be found in the operating
instructions supplied with the relevant product.
Type Title Contents
Docu package with brief
description + manuals on
CD ROM P.BE−SFC−DC−UDOK Brief description: Important in
structions on commissioning and
preliminary information.
Manuals: Contents as described
below.
Manual Single Field Controller SFC−DC
P.BE−SFC−DC−IO−..
Installation, commissioning and
diagnosis of electric axes with the
Single Field Controller SFC−DC
with communication via I/O inter
face.
Help system for software Festo Configuration Tool Help
(contained in the FCT software) Function description of the Festo
Configuration Tool configuration
software.
Further manuals
(in preparation) Field bus variants
type P.BE−SFC−DC−CO−..
type P.BE−SFC−DC−PB−..
type P.BE−SFC−DC−DN−..
Communication and commission
ing the relevant field bus.
Operating instructions Electric slide
type SLTE−...
Fitting and commissioning of the
electric slide as a drive element.
Information on the version