Festo SBSC-EN Manual Download

Page: 54 / 365

Page 54

Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016

Vision Sensor Manual

Fig. 42: Vision Sensor Device Manager, IP- Setup

s. chap. Network settings / Ethernet connection

Network settings, Short reference

and

Network

connection

4.5.7 Update / Firmware update

You can update the firmware of the selected sensor through the menu item File/Update.

The appropriate firmware update file must first have been obtained via download from the Festo website
or from Festo Support.

Select the appropriate firmware file in the file dialogue box that opens and follow the instructions.

Do not disconnect the power to the sensor during this process unless prompted by the onscreen
instructions.

Fig. 43: Vision Sensor Device Manager, Firmware update

4.5.8 User administration / Passwords

The SBS configuration distinguishes between three user groups, which have different authorisations:

Summary of Contents for SBSC-EN














































































































































































































































































































































































Search results

Summary of Contents for SBSC-EN

Reviews:

Related manuals for SBSC-EN

Brands by name

Popular brands

Festo SBSC-EN, Manual

Search results

Summary of Contents for SBSC-EN

Reviews:

Related manuals for SBSC-EN

Brands by name

Popular brands