Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016
Page 211
Vision Sensor Manual
Fig. 211: Vision Sensor Visualisation Studio
Except the archiving all functions of Vision Sensor Visualisation Studio are available also in the module
Vision Sensor Configuration Studio.
4.7.2 Commands / Freeze image
With the "Freeze image" button, you can request single images according to the type required (current
image, next image, next failed image) and freeze them in the display window.
The required single image is displayed and the image counter stops at the corresponding image number.
Press "Continue" to end the frozen image state.
4.7.2.1 Zoom
With the button "Zoom" the image is opened in a new window with enlarged display.
4.7.3 Image recorder
An image recorder is available in the Vision Sensor Configuration Studio and Vision Sensor Visualisation
Studio programmes. When the recorder is activated, either all images or just error images are
continuously loaded into the internal memory. This covers 10 images, the oldest images are in turn
replaced (FIFO buffer). The recorded images can then be called-up and displayed with a PC, or stored on a
PC or on an external storage medium, and are then available for analysis or simulation purposes in offline
mode.
In the Vision Sensor Visualisation Studio program, you may be required to enter a password (if activated)
to call up recorder images (User user group, see user administration).
Activating recorder:
Summary of Contents for SBSC-EN
Page 1: ......
