Page 200
Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016
Vision Sensor Manual
Displays in image window (Page 205)
Search and parameter zones (Page 205)
4.6.7.1 Trigger settings
Select the required trigger mode in the job settings in the "General" tab:
Parameters Functions
Triggered
Operation with external trigger, or trigger button in the interface
Free run
Operation with automatically running self-trigger; the sensor supplies images with the
maximum possible frequency
Select the form in which the images are to be supplied by the sensor using the option buttons in the zone
Trigger/Collect image:
Parameters Functions
Single
image
Recording of a single image, image recording occurs once when:
1. Trigger mode = triggered: First external trigger signal or with the trigger button on the
interface
2. Trigger mode = free run: First click on the "Single image" button
Continuous
Continuous supply of images, image recording occurs continuously when:
1. Trigger mode = triggered: Each external trigger or with each click on the trigger button
on the interface
2. Trigger mode = free run: Continuously through internal self-triggering with maximum
frequency
When exposure time, amplification, illumination or resolution parameters are modified in the Job settings,
a new image is automatically requested from the sensor.
To obtain a continuously updated live image even without trigger, carry out the following (if necessary
temporary) settings:
l
Set to free run under "Job/General"
l
Set to continuous under "Trigger / Collect image"
4.6.7.2 Switching between online and offline mode
Two operating modes are available for sensor configuration and test run, which you can select in the
Connection window.
l
Online mode: Configuration with connected sensor.
l
Offline mode: Simulation of a sensor with the help of images stored in film strips.
Summary of Contents for SBSC-EN
Page 1: ......
