background image

3.   Installation

3-12

Festo  GDCS-SBOC-EN  en 1602a

Ethernet connection

A network consisting of several Compact Vision Systems can
be built up and the connection to the PC can be created via
the Ethernet interface. For connection to the Ethernet, there
is a d-coded M12 plug on the reverse side of the Compact
Vision System.

M12 plug

Pin

Signal

Description

Core colour 

1)

1

4

2

3

1

TD+

Transmitted data+

White/orange (WH OG)

2

RD+

Received data+

White/green (WH GN)

3

TD-

Transmitted data–

Orange (OG)

4

RD-

Received data–

Green (GN)

Metal covering

Screening (shield)

1) Core colours of the original cable type SBOA-K30E-M12S; the following cores of the original cable

remain unused: white/blue, blue, white/brown, brown

Tab. 3/5:

Pin allocation of the Ethernet interface

The Ethernet interface of the Compact Vision System complies
with the standards 10BaseT/100BaseTX for 100 Mbit net­
works.

Note

Use a screened plug connector which will guarantee
continuous contact between the screening and the Com­
pact Vision System.

Connect the screening of the Ethernet cable on the side
opposite the vision system to the earth potential with
low impedance.

If the Ethernet cable is used with a fixed Ethernet building
installation, correct earthing of the Ethernet cable will nor­
mally exist. In combination with mobile equipment, additional
earthing measures at the Ethernet cable may be necessary to
comply with electromagnetic compatibility (EMC) require­
ments.

Summary of Contents for SBOC-M-R1B-H

























































































Reviews: