Festo SBO***-Q Series, Manual

Page: 80 / 256

4. Commissioning
4-18
Festo P.BE-SBO-Q-EN en 1602e
SBOI SBOC with standard lens from Festo
– 1. Loosen the locking screw on the lens.
2. Turn the aperture ring to adjust the aperture.
3. Tighten the locking screw again slightly.
Tab. 4/4: Setting the aperture
7. Now adjust the lighting mounting position, if necessary,
to provide optimal lighting for the characteristics to be
checked.
The lighting is optimally oriented if it emphasises the rel­
evant check part characteristics with maximum contrast.
8. Now perform an (iterative) optimisation of all steps and
settings. Repeat steps 4 to 7.
The setting is optimal when the relevant check part charac­
teristics are sharply depicted and emphasised with maximum
contrast.