Festo SBO***-Q Series, Manual

Page: 32 / 256

1. System overview
1-14
Festo P.BE-SBO-Q-EN en 1602e
1.5 Selecting a lens for type SBOC
No lens is included with delivery of SBOC-Q. Lenses are avail­
able as accessories for the device.
Note
The protection classes IP65 and IP67 can only be achieved
if the protective lens barrel is used (
è
chapter A.4 Tech­
nical data).
Operation with
protective lens barrel Use lenses according to the C-Mount standard.
Please note the following lens dimensions:
– The maximum possible lens diameter is 38 mm
– The maximum possible length of the lens from the front
edge of the lens to the flange surface of the thread side is
42 mm.
Note
Note that with most lenses the lens length changes when
the focus is reset. The setting “infinite” usually leads to
the shortest lens dimension.
Operation without
protective lens barrel If you remove the protective lens barrel and the adapter, you
can use lenses according to the CS-Mount standard.
A spacer ring (5 mm) is required for C-Mount lenses without
protective lens barrel and without adapter for fastening the
protective barrel.
Screw an SBOL-C-5 adapter into the device to ensure the
correct support dimension (
è
chapter 1.4).