Festo PROFIBUD-DP, Elektronics Manual

Page: 66 / 154

2. Commissioning CPV−DI02 (PROFIBUS−DP)
2−8
Festo P.BE−CPV−DI02−EN en 0704NH
Module consistency
The CP system supports the following variants of module
consistency:
over the selected format (word)
The following table provides an overview of the possible
DPidentifiers for the CPV−DI02:
C P...−S C a n d e x ten s i o n DP i d enti f ie r C o mm ent
S ie m en s E N 501 7 0
CPV−DI02 (without extension) ID: 16DO ID: 21
h
/33
d
16 digital outputs/valve
coils of the CPV
Extension: 8 digital inputs ID: 8DI ID: 10
h
/16
d
e.g. CPI/CP input
modules
Extension: 16 digital inputs ID: 16DI ID: 11
h
/17
d
modules
Extension: 24 digital inputs ID: 24DI ID: 12
h
/18
d
Extension: 32 digital inputs ID: 32DI ID: 13
h
/19
d
Extension: 8 digital outputs ID: 8DO ID: 20
h
/32
d
e.g. CPI/CP output
modules CP valve
Extension: 16 digital outputs ID: 16DO ID: 21
h
/33
d
modules, CP valve
terminals
Extension: 24 digital outputs ID: 24DO ID: 22
h
/34
d
Extension: 32 digital outputs ID: 32DO ID: 23
h
/35
d
Extension: Tool change configuration
(32 digital inputs and outputs) ID: 32DX ID: 33
h
/51
d
see section 2.3.4
Tab.2/2: Overview of DP identifiers for various extensions to the CPV−DI02
No te
Enter the identifiers corresponding to the physical
sequence of the modules on the CP extension string,
starting with the CPV−DI02.