Festo MPA-L Series, Description

Page: 52 / 160

2. Mounting
2−12
Festo P.BE−MPAL−EN en 1008NH
Variant Mounting points
1
Valve terminal MPA−L with multi−pin plug connection For each mounting,
type VMPAL−BD, half of which
is clipped into two neighbour
ing sub−bases (see also
I
nformation in Appendix A,
Tab.A/2):
one M6 screw
1
Valve terminal MPA−L with CPX terminal
1
Tab.2/3: Additional mounting for wall mounting
Mounting Proceed as follows:
1. Attach the mounting to the rear lower surface in such a
way that each half of it lies on two adjacent connection/
supply plates.
2. Rotate (1.) the mounting in the direction of the slots of the
connection/supply plates (see Fig.2/4).
3. Press up (2.) the mounting on the connection/supply
plates until the hooks snap into the slots.