Festo MPA-FB Series, Manual

Page: 73 / 168

3. Installation
3−27
Festo P.BE−MPA−EN en 0502b
3.4.2 MPA valve terminal with MP connection (only MPA1)
The addresses must be assigned in ascending order with
out gaps
Counting begins on the valve terminal from left to right
(see diagram).
Depending on the electronic module, a valve location oc
cupies one or two addresses (see table).
The following assignment applies:
Solenoid coil 14 occupies the lower−value address,
solenoid coil 12 occupies the higher−value address.
Sum
of valve
locations Maximum number of valve loca
tions which can occupy two ad
dresses
1)
Valve locations which occupy one
address each
2)
4 all valve locations −−−
8 all valve locations −−−
12 all valve locations −−−
16 8 valve locations 8 valve locations
20 4 valve locations 16 valve locations
24 −−− all valve locations
1) Two solenoid coils per valve location can be controlled.
2) One solenoid coil per valve location can be controlled.
Table3/6: Address assignment of the MPA valve terminal with MP connection (only
MPA1) type
MPA1−MP −...