Festo MPA-FB Series, Manual

Page: 43 / 168

2. Fitting
2−13
Festo P.BE−MPA−EN en 0502b
2.3 Fitting/removing the inscription label holders
An inscription label holder can be fitted onto each sub−base
to enable the valves or work connections to be marked.
Fitting Proceed as follows:
·
Clip the inscription label holders into the grooves in the
sub−bases (see diagram):
1
Recess for the
inscription label
holder in the
sub−base
2
Inscription label
holder
1
2
Fig.2/4: Fitting the inscription label holder