Festo MPA-FB Series, Manual

Page: 142 / 168

A. Technical appendix
A−4
Festo P.BE−MPA−EN en 0502b
MPA2 Type MPA1 General information
Materials
Sub−bases, supply unit,
Valve plates and end plates
Electronic module
MP or MPM connection
Seals
Al
POM/polycarbonate
Polyamide 6
elastomer, NBR
Weights (in g):
basic weight
per sub−base
per supply plate with exhaust plate or
large surface−mounted silencer
per valve plate
per blanking plate
per complete CPX module
left−hand end plate (CPX terminal)
approx. 400 g
185 g (4 valve locations)
approx. 150 g
approx. 56 g
24 g
approx. 210 g
approx. 80 g
approx. 400 g
185 g (2 valve locations)
approx. 150 g
approx. 100 g
44 g
approx. 210 g
approx. 80 g
TableA/1: General technical specifications
Please note
MPA valve terminal with MP or MPM connection:
The maximum number of sub−bases which can be confi
gured corresponds to the number of addresses avai
lable. The maximum number of solenoid coils which can
be actuated is limited by the multipin connection to 24
addresses.
MPA valve terminal with CPX terminal:
Maximum 8 MPA sub−bases are permitted.
MPA valve terminal with CPX terminal or with MPM connec
tion:
If the terminal is fitted on a wall and has 7 or more sub−
bases, additional fastenings (wall backets) must be
fitted after every 2 to max. 4 sub−bases.