Festo MPA-ASI Series, Manual

Page: 41 / 208

1. Summary of components
1−23
Festo P.BE−MPA−EN en 0802c
Pressure regulator plates
The pressure regulator plates of the vertical stacking are
marked on the MPA−S valve terminal with the Ident. code. The
code is marked on the side of the component. With the aid of
the following table you can identify the pressure regulator
plates.
Ident.
code Vertical stacking components MPA1 MPA2
PF Pressure regulator plate P for connection 1, input pressure 6 bar X X
PH Pressure regulator plate B for connection 2, input pressure 6bar X X
PG Pressure regulator plate A for connection 4, input pressure 6 bar X X
PN Pressure regulator plate B for connection 2, input pressure 6bar,
reversible −−− X
PM Pressure regulator plate A for connection 4, input pressure 6 bar,
reversible −−− X
PA Pressure regulator plate P for connection 1, input pressure 10bar X X
PC Pressure regulator plate B for connection 2, input pressure 10bar X X
PB Pressure regulator plate A for connection 4, input pressure 10 bar X X
PL Pressure regulator plate B for connection 2, input pressure 10bar,
reversible −−− X
PK Pressure regulator plate A for connection 4, input pressure 10 bar,
reversible −−− X
T Pressure gauge for pressure regulator plate X X
Tab.1/10: Identification of the pressure regulator plate in the type code
The switching times of the pressure regulator plate can be
found in appendix B, Tab.B/5.